825 ADhesive Nylon

• 825 hot melt adhesive is suitable for nylon waterproof cloth, PU, ​​nylon cloth heat transfer adhesive
• Adhesive characteristics: This hot melt adhesive is a special adhesive for nylon water-repellent cloth. It is recommended to use a printing mesh of 100-150 mesh. This hot melt adhesive is non-toxic, has low taste, is weather-resistant, and has good adhering effects.
• Dilution solvent: Ketone solvent has good solubility
• Drying conditions: It can be dried naturally in about 1 hour or baked in the oven at low temperature for 20-30 minutes to be completely dried.
• Storage: If properly stored at no more than 40°C and in a tight original container, its stability can be maintained for at least one year.
• Safety: Because it contains solvents, special care must be taken when handling the product. This product is flammable, so the container should be kept away from fire sources. Avoid contact with skin and eyes or inhalation of this product. If it accidentally gets into your eyes, please wash it with plenty of water first, and then seek medical examination and treatment. Please operate this product in a well-ventilated environment and do not allow this product to flow into the sewage system.
• Note: The above is based on normal use conditions before its excellent performance can be exerted. Therefore, it is recommended that the addition ratio of diluent solvent is between 10% and 20%. Since the usage conditions are different among manufacturers, it must be used before use. Try its properties.