CP Transfer Adhesive

• Suitable for transfer printing on carbon fiber (CARBON) such as golf clubs
• Adhesive characteristics: Based on #800 ink, print on PET release film and then print CP adhesive. The transfer temperature is 170℃~180, the pressure is 1-2kg/cm², and it can be transferred to carbon fiber in an instant. superior.
• This adhesive is non-toxic, low-odor, wear-resistant, temperature-resistant, weather-resistant, non-yellowing, and has good alcohol resistance.
• Dilution solvent: Ketones, toluene, xylene, all have good solubility.
• Storage: If properly stored at no more than 40°C and in a tight original container, its stability can be maintained for at least one year. If condensation occurs at a low temperature of 20°C, it will return to its original appearance as long as it is heated with water. , and does not affect its transfer characteristics.
• Safety: Because it contains solvents, special care must be taken when handling the product. This product is flammable, so the container should be kept away from sources of fire. Avoid contact with skin and eyes or inhalation of this product.
• If it accidentally gets into your eyes, please wash it with plenty of water before seeking medical examination and treatment. Please operate this product in a well-ventilated environment and do not allow this product to flow into the sewage system.