8153 Leather Adhesive

• 8153 Hot melt adhesive suitable for thermal transfer printing on real leather and other materials
• Adhesive characteristics: This hot melt adhesive is a special hot melt adhesive for leather. It is recommended to use a printing mesh of 120-150 mesh. This hot melt adhesive is non-toxic, has low taste, is weather-resistant, and has good adhering effects.
• Dilution solvent: Ketone solvents have good solubility.
• Drying conditions: It can be dried naturally in about 1 hour or baked in the oven at low temperature for 20-30 minutes to be completely dried.
• Storage: If properly stored at no more than 40°C and in a tight original container, its stability can be maintained for at least one year.
• Safety: Because it contains solvents, special care must be taken when handling the product. This product is flammable, so the container should be kept away from fire sources. Avoid contact with skin and eyes or inhalation of this product. If it accidentally gets into your eyes, please wash it with plenty of water first, and then seek medical examination and treatment.
• Note: The above is based on normal use conditions in order to achieve its excellent performance. Therefore, it is recommended that the appropriate addition ratio of diluent solvent is between 10% and 20%. Since the usage conditions vary from manufacturer to manufacturer, test before use. its characteristics. This product is slightly sticky after printing and drying, and needs to be stacked with the silicon-containing surface when folded.